Our special discounts for lasers, diodes, optics, safety,... - March 2007
KYLA: Laser Diode Power Supply
Lasea is proud to announce the extension of its Kyla range with the new Kyla I-s-2.
The Kyla I-s is an ultra compact laser driver allowing a perfect current & temperature regulation of your diodes.
I-s-1 Features: Current controller 0-50A (Voltage 0-30V for a total power Diode+TEC of 375W max), Temperature controller 0 - 50°c (manufacturing setting), Cooling system with base plate, Special diode protection, Temperature interlock, Front panel lights (Laser On, Shut Down, Temperature interlock, Temperature High, Temperature Low), BNC input for shut down or pulsing, BNC input for current modulation.
The I-s-2 version offers a temperature control (display and potentiometer) on the front panel, a software control interface, and an aiming beam control.
Special offer until 31st march 2007: Laser Driver KYLA I-s-2: 4.479?
Please contact us for the integration of diodes or our fiber lasers.
Gentec: SOLO 2 & UNO monitors for Powermeters
More information
Gentec-EO is proud to announce the latest additions to its monitor family: the SOLO 2 and the UNO.
The new SOLO 2 Energy and Power Meter is more ergonomically shaped; with a wide screen 2 times bigger than the SOLO-PE, a transfer rate 20 times faster and the ability to read high repetition rate energy detectors up to 3 kHz.
The new UNO Power Meter presents the same inventive ergonomics as the new SOLO 2 ; a wide screen with large digit and easy one-finger navigation, but in a very affordable package that includes the most useful functions.
Once again, with its SOLO 2 and UNO monitors, Gentec-EO is raising the bar for the highest quality/price ratio meters on the market.
Special offer until 31st march 2007: SOLO2: 1.099?* - UNO: 595?*
Please contact us for our power and energy meters.
Lasermet: Interlock control system
More information
Signs which are left on continuously even when the laser hazard is not present, quickly become ignored, so it is important to use a system incorporating automatic switching. This can be accomplished either directly from the ICS laser interlock control system (as shown on the picture) or by use of the LCU light control unit. Various options are available with standard or custom sign panels.
Special offer until 31st march 2007: Basic illuminated warning sign: 209?* - LCU: 419?*
EKSPLA: High Damage Threshold Visualizer
This Laser beam visualizer transforms an invisible light into visible. When CW or pulsed laser radiation of wavelength 880-1070nm falls onto the working surface, the latter glows in the second harmonic of the beam, and without any fading. Damage threshold is higher than 1kW/cm².
Use this item to adjust and check a shape of a laser beam. It helps to see the structure of a laser beam intensity distribution.
Special offer until 31st march 2007: Visualizator: 79?*
Please contact us for other optical and opto-mechanical equipments.
Glendale: New High Transmission filters
HT-YAG is the first in a series of polymer filters offering extra high visible light transmission, available in Glendale innovative XC frame style.
HT-YAG boasts a visible luminous transmission of 68 %, the highest in the industry. This compares to 72% for glass filters with a similar optical density. It is already available from stock.
HT-YAG : 920 - 1064nm OD > 7
Special offer until 31st march 2007: HT-YAG (XC Frame): 199?*
Please contact us for other frame styles and wavelengths.
GlobalLaser: DragonFly Range
The low cost DragonFly DPSS Green laser diode module produces a circular beam with low beam divergence, a wavelength of 532nm and output powers of 1mW and 5mW.
The inbuilt Laser Intelligent Control (LIC) electronics provide stable CW operation with automatic power control (APC), reverse polarity protection and over temperature protection. The LIC ensures a high level of reliability over time and temperature. The laser operates from a low voltage input 5 Vdc and a low operating current of 350 mA (Max).
The Dragonfly laser consists of anodised aluminum housing, driver circuit, user-adjustable focusing lens. Electrical connections are via flying leads.
Special offer until 31st march 2007: DragonFly 5mW Laser: 479?*
Lumics: Fiber Bundle Laser Module
More information
The LU0915 C120 series offers an optical power up to 120W from a 3 to 19 x 105/125µm, N.A. 0.22 multi-mode fiber bundle. This design delivers a high brightness homogenized beam from the fiber, and is equivalent to a 400µm core for 50W bundles, and 600µm for the 120W. In addition the price of this design is lower than usual high power diodes. This performance makes them a valuable tool for the highly efficient pumping of Nd:YAG laser and direct diode application with distributed heat dissipation for material processing.
Special offer until 31st march 2007: Fiber bundle 915nm 50W 400µm: 1.989?*
EKSPLA: Nanosecond Tunable Laser System from UV to IR
More information
NT340 series tunable systems comprise a nanosecond optical parametric oscillator and Q-switched pump laser in a single compact-housing. The system features a high conversion efficiency, no gap hands free tuning from 210 to 2300nm, output energies up to 20mJ in VIS, 5cm-1 linewidth, and 3 to 5 ns pulses !
Moreover a separate output for the pump laser beam allows output pulses of 70mJ at 355nm !
Special offer until 31st march 2007: Nanosecond Tunable Laser System NT342/1/UV: 40.900?*
Please contact us for custom products.
* Amount VAT excluded - ExWorks Lasea - only for Customers from Benelux until the 30th March 2007.
Visit us at Fotonica - Netherlands - 3rd April 2007
Visit us at Laser 2007 - Germany - 18th-21st June 2007
About Lasea :
Created in 1999 to supply laser solutions for space industry, Lasea has continuously increased its knowledge, equipments and facilities to provide reliable and innovative laser solutions. Providing the best choice for laser components (laser, diodes, driver, optics, laser safety, opto-mechanics) or laser systems, we also offer our expertise as well as integration competencies. Do not hesitate to contact us for the integration of your diodes on our drivers, for a special optical system, for a trial in our application lab or a common development.
Our engineer team stays at your disposal for finding the best solution regarding your need.
Contact :
LASEA SA
Liège Science Park
Rue des Chasseurs Ardennais, 4
4031 ANGLEUR
BELGIUM
Tel.: +32.4.365.02.43
Fx.: +32.4.384.37.55
info@lasea.be
For more information, please feel free to visit us at www.lasea.be
If you do not want to receive our newsletters, just send us an email at unsubscribe@lasea.be
Specifications may be subject to change without notice.